Electronics Industry News

 

Murata speeds reliable LoRa deployments

19 October 2018 Murata speeds reliable LoRa deployments Murata has announced the LBAA0ZZ1QM (US) & LBAA0ZZ1TY (EU) LoRa Pico Gateway 14-pin metal-shielded module. Supporting eight channels and available in two variants for use in either EU or US ISM bands, this ultra compact module measures just 55mm x 21mm x 3.4mm and is believed to […]

Read more >>> Murata speeds reliable LoRa deployments

19 October 2018 Flex Power Modules boosts portfolio for RFPA applications Flex Power Modules has launched the PKB4216HDPI, the latest model in its series of DC-DC converters aimed at Radio Frequency Power Amplifier (RFPA) applications in the telecom market segment. Following on from the recently introduced 750W PKJ4000 series, the PKB-D is a high-density converter […]

Read more >>> Flex Power Modules boosts portfolio for RFPA applications

16 October 2018 1U programmable DC power supply series extended with 1,700W rated models TDK has added 1,700W rated models to the TDK-Lambda GENESYS+ series of programmable DC power supplies. These additional units provide the capability of operating from a single phase wide range ac input of 85 to 265Vac, rather than three phase 208/400/480Vac. […]

Read more >>> 1U programmable DC power supply series extended with 1,700W rated models

16 October 2018 High-voltage super junction MOSFET MagnaChip Semiconductor, a designer and manufacturer of analogue and mixed-signal semiconductor platform solutions, has introduced a High-Voltage Super Junction MOSFET with a 900V breakdown voltage and low total gate charge (Qg). The device with two package types, I-PAK and D-PAK, will sample to customers in November this year […]

Read more >>> High-voltage super junction MOSFET

15 October 2018 Low-power 1.8V temperature sensor family Microchip has announced five new 1.8V temperature sensors, including the industry’s smallest five-channel temperature sensor with standard lead spacing. The EMC181x family pf temperature sensors also introduces system temperature rate-of-change reporting, a feature that provides advanced warning on how the temperature of a system is fluctuating. The […]

Read more >>> Low-power 1.8V temperature sensor family

09 October 2018 RF PXI switches family launched by Pickering Interfaces 8GHz solid-state RF PXI switches Pickering Interfaces launched a 13-model family of 8GHz solid-state RF PXI switches, including SPDT, SP4T, SP6T, SP8T, SP16T and 4×4 Matrix devices. Pickering Interfaces’ series 40-88xA high-performance switch family now covers 10MHz to 8GHz in the modular PXI format […]

Read more >>> RF PXI switches family launched by Pickering Interfaces

09 October 2018 Infineon smart switch supports fuel saving technology Infineon smart switch Infineon is launching a new member of its FLEX multichannel low-side switches family that will help reduce fuel consumption and thus CO2 emissions. The TLE9104SH is the first smart four-channel low-side switch for currents up to 5A DC in 12V systems. This […]

Read more >>> Infineon smart switch supports fuel saving technology

11 October 2018 XP Power launches highly flexible 500W peak-power AC-DC supply XP Power’s CMP250 series of high peak power AC-DC power supply units, has been designed to target healthcare, industrial and IT applications. Offering a flexible combination of electrical and thermal characteristics, the power supplies deliver up to 500W of peak power for up […]

Read more >>> XP Power launches highly flexible 500W peak-power AC-DC supply

10 October 2018 New in-series charging stations for BODY-CASE New in-series charging stations for BODY-CASE New mountable stations for OKW’s BODY-CASE wearable enclosures enable multiple units to be charged at once. BODY-CASE is OKW’s first enclosure designed specifically to fit a standard 18mm watchstrap. Applications include data recording and transmission; tracking and monitoring; emergency call […]

Read more >>> New in-series charging stations for BODY-CASE

10 October 2018 Faster, more flexible probe from STMicroelectronics STMicroelectronics (ST) has introduced the next-generation STLINK-V3 probe for programming and debugging STM8 and STM32 microcontrollers, designed to add enhancements to further increase flexibility and efficiency. Now featuring mass-storage support, a virtual COM port with multipath bridge, and three-times faster write performance, the STLINK-V3 saves development […]

Read more >>> Faster, more flexible probe from STMicroelectronics

09 October 2018 RS launch IP67 rated 1.80mm wire-to-wire connector system Molex Squba range RS Components (RS) has introduced the Molex Squba range of 1.80 mm sealed wire-to-wire connectors, designed to fit into small spaces while offering IP67 protection against liquid, dust and dirt. Squba supports currents up to 6.0 A carried over No. 24 […]

Read more >>> RS launch IP67 rated 1.80mm wire-to-wire connector system

09 October 2018 Renesas unveil RZ/A2M Microprocessor for high-speed processing RZ/A2M Microprocessor Renesas Electronics Corporation is expanding its range of embedded artificial intelligence (e-AI) solutions for incorporating AI into embedded systems by bringing intelligence to endpoints. Approximately 150 companies in more than 10 countries worldwide are already conducting trials based on this technology, and there […]

Read more >>> Renesas unveil RZ/A2M Microprocessor for high-speed processing

09 October 2018 Development solution for software debugging over the XCP protocol Vector and Lauterbach are offering an integrated solution for ECU software development based on the new ASAM standard “Software Debugging over XCP”. It is designed to eliminate the need to repeatedly switch between hardware for measurement, calibration, and debugging. The ECU debug connector […]

Read more >>> Development solution for software debugging over the XCP protocol

09 October 2018 Advantech LoRa and LoRaWAN solutions for intelligent monitoring applications LoRa and LoRaWAN solutions Advantech has expanded its range of wireless products with the launch of the WISE-6610 LoRaWAN gateway and Wzzard LRPv2 LoRa WAN node. Wzzard LRPv2 Node is an integrated LoRaWAN sensing platform for applications ranging from I/O sensor data management […]

Read more >>> Advantech LoRa and LoRaWAN solutions for intelligent monitoring applications

03 October 2018 Melexis release IMC technology in its Latch & Switch product range Using the lateral field rather than the perpendicular field. Melexis, a global microelectronics engineering company, announced the rollout of its Integrated Magnetic Concentrator (IMC) technology to multiple devices within its Latch & Switch product range. Melexis’ Latch & Switch sensors use […]

Read more >>> Melexis release IMC technology in its Latch & Switch product range

03 October 2018 Circular connectors available from Lane Electronics Bayonet coupling circular power connectors Lane Electronics has made available the Weald Electronics LMH series of bayonet coupling circular power connectors, designed to meet the requirements of MIL-DTL-26482. The LMH series features peak working voltages as high as 1500V – DC or AC. Maximum current rating […]

Read more >>> Circular connectors available from Lane Electronics

03 October 2018 C&K’s SAM series multiway switches SAM series multiway switches C&K has announced the availability of its new SAM series multiway switch. The switch is designed for seamless integration, direct motor management based on SPDT (single pole, double throw) contacts, and flexible mechanical characteristics including travel, shaft shape and dimensions. The SAM series […]

Read more >>> C&K's SAM series multiway switches

04 October 2018 DIN Rail Power from PULS DIN Rail Power PULS Power has announced the availability of DIN Rail power solutions for medical applications, where specific special approvals and strict safety standards apply. Medical products and systems generally have very little space available for the power supply and associated hardware, leaving the medical OEM […]

Read more >>> DIN Rail Power from PULS

05 October 2018 NINA-B3 series now qualified for Bluetooth 5 NINA-B3 series u-blox has announced that its NINA-B3 series is now qualified for all Bluetooth 5 features (including long range). With NINA-B3’s Bluetooth 5 support, Bluetooth long range qualification and worldwide certifications, u-blox says its customers can open new markets with innovative applications, further shorten […]

Read more >>> NINA-B3 series now qualified for Bluetooth 5

05 October 2018 AVR microcontrollers now beta supported in MPLAB X IDE MPLAB X Microchip has announced the release of MPLAB X Integrated Development Environment (IDE) version 5.05, which beta supports the majority of AVR microcontrollers (MCUs). This release will allow designers who traditionally used PIC MCUs and developed with the MPLAB ecosystem to easily […]

Read more >>> AVR microcontrollers now beta supported in MPLAB X IDE

Showing results 1 - 20 of 2,825 for the category: Electronics Industry News.