Testing & Measurement

 

X-Ray Fluorescence Spectroscopy (XRF)

X-Ray fluorescence (XRF) is the emission of fluorescent X-rays from a material that has been excited by bombarding with high-energy X-rays or gamma rays. The X-ray fluorescence (XRF) method is widely used for elemental analysis and chemical analysis, particularly in the investigation of metals, glass, ceramics and building materials, and for research in geochemistry, forensic […]

Read more >>> X-Ray Fluorescence Spectroscopy (XRF)

Saelig WiPry-Combo is the world’s first dynamic power meter and spectrum analyzer accessory for the iPad, iPod Touch, and iPhone. WiPry-Combo converts an iOS mobile device into an ultraportable spectrum analyzer and dynamic power meter. WiPry-Combo brings RF power measurements to a graphical interface to show RF waveforms like an oscilloscope – instead of displaying […]

Read more >>> iPhone-based WiFi Spectrum Analyzer and Power Meter

Saelig MSO-28 USB-powered 60MHz mixed-signal oscilloscope PC adapter is a lightweight and economical scope adapter that combines a two-channel oscilloscope with a synchronous 8-channel logic analyzer, sampling at 200MSa/s (5ns), all in one compact, extremely portable USB instrument. Simultaneously-clocked analog waveforms and digital data can now be displayed in phase on the same screen with […]

Read more >>> PC-based USB Oscilloscope and Logic Analyzer 60MHz Adapter

Saelig Packet-Master USB-PET Protocol and Electrical Tester is capable of performing the suite of tests defined in the ‘Battery Charging, USB On-The-Go and Embedded Host Automated Compliance Plan’. It comes with computer-operated software application GraphicUSB for generating test reports, and also analyzer-style captures. The Packet-Master USB-PET can be connected to a host PC using a […]

Read more >>> USB Battery Charging Protocol Electrical Tester

The role of FPGAs is increasing to high-speed and high-end applications. FPGA usage in computer and communications systems has grown in parallel with the number of gates and the hgh-speed capabilities of newer/advanced FPGA devices. Usually FPGA applications are limited by their speed of processing. Now FPGAs are emerging as a likely platform for next-generation […]

Read more >>> FPGA Controlled Tester for Circuit Board Testing and Debugging

January 2012:- Tektronix introduced a new comprehensive high-speed serial bus protocol test platform that allows engineers to analyze, stimulate, stress and characterize high-speed serial links — with support for speeds up to 10Gb/s. With the new TPI4000 Protocol Analyzer Series, customers can use one instrument to perform multiple test functions and to look at a […]

Read more >>> Serial Bus Protocol Tester Analyzer Digital Sampling Oscilloscope

PCI Express (PCIe) logic protocol testing, verification, validation, debugging and analysis are now possible with Tektronix TLA7SA00 Series logic protocol analyzer. The TLA7SA00 Series logic protocol analyzer modules provide an innovative approach to PCI Express validation that spans all layers of the protocol from the physical layer to the transaction layer. Designed to make PCIe […]

Read more >>> PCI Express Logic Protocol Analyzer for Debugging and Analysis

AT4 Wireless RFID / NFC Protocol Testing System is the most powerful testing tool for RFID Conformance testing, development and manufacturing support, performance evaluation and worldwide benchmarking. AT4 Wireless RIDER RFID/NFC Testers support the most important RFID standards and technologies in the UHF and HF bands. RIDER Test Systems have been designed as a flexible, […]

Read more >>> RFID / NFC Protocol Testing System

AT4 Wireless offers a wide range of test systems for Conformance and Development testing for WiMAX. AT4 Wireless WiMAX RF and Protocol Conformance Test system performs testing according to WiMAX Mobile Radio Conformance Test Specification defined by ETSI. It supports the applicable tests for WiMAX certification of Base Stations (BS) and Mobile Stations (MS). It […]

Read more >>> WiMAX RF Protocol Testing System – AT4 Wireless

AT4 Wireless MiNT (Mobile Communications Integrated Tester) is a family of test platforms for mobile communications. The MiNT RF family supports GSM 850/900/1800/1900, GPRS, E-GPRS, AMR, EDGE and DARP for 2G and 2.5G technology and W-CDMA, RRM and HSPA for 3G and 3.5G technology (covering national frequency bands). Mobile terminal development and certification testing is […]

Read more >>> Mobile Communications Tester for Testing GSM, GPRS, EDGE, WCDMA, HSPA

National Instruments (NI) VeriStand is the latest version of its configuration-based software environment for creating real-time test and simulation applications, including HIL (hardware-in-the-loop) simulators and test cells. The updated software has been enhanced with a stimulus profile editor and the Inertia test-cell add-on. It also provides expanded native support for 14 modeling environments. NI VeriStand […]

Read more >>> Real-Time Testing and Simulation Software NI-VeriStand

Semiconductor design is starting to see the adoption of 3-D IC packages. These packages involve stacking multiple bare die vertically using connections that go directly though the silicon. Through-silicon vias (TSV) result in shorter and thinner connections that can be distributed across the die. This reduces package size and power consumption while increasing performance due […]

Read more >>> IC Testing & Failure Analysis Methods for 3-D ICs of Through-Silicon Vias (TSV) Technology

The makers of JTAG Live Buzz and BuzzPlus are proud to announce AutoBuzz, the most exciting addition yet to their no-netlist-required range of JTAG/boundary-scan test and debug tools. AutoBuzz is an amazing tool that uses a unique ‘seek and discover’ feature to scan completely a compliant design and then perform comparative tests using JTAG/Boundary-Scan. With […]

Read more >>> AutoBuzz JTAG Boundary-Scan Tool for Debug & Repair

Today’s testing requirements demand higher frequency response, simplified installation and reduced down time associated with mechanical wear. The need for a more accurate and versatile non-contact rotary torque sensor has evolved the industry from technology defined by slip rings and bearings into the digital age. Leading the way is Honeywell’s new TMS 9250 Wireless Torque […]

Read more >>> Torque Measurement System with Modern Digital Telemetry Technology

Manufacturers in the automotive industry’s premium segment frequently rely on FlexRay as a communications interface. They can now benefit from the high acquisition rate and accuracy of the R&S RTO oscilloscopes from Rohde & Schwarz: A new option offers all the features needed for fast and reliable FlexRay debugging. The design of the R&S RTO […]

Read more >>> RTO Oscilloscopes to FlexRay Communication Interface Testing and Debugging

December 2011:- Tektronix Inc., a leading innovator of signal generation and analysis solutions for the microwave and RF industry, introduced the compact RF and microwave power sensors/meters that feature the industry’s fastest measurement speed, cover a wide frequency range, and provide extensive power measurements from basic average power to pulse profiling. The Tektronix PSM RF […]

Read more >>> RF Microwave Power Sensors/Meters for RF Power Measurements

November 2011:- Agilent Technologies Inc. introduced the 4100 Microwave Plasma-Atomic Emission Spectrometer, a breakthrough elemental analysis instrument that runs entirely on air. The 4100 Microwave Plasma-Atomic Emission Spectrometer (MP-AES) fundamentally changes the way scientists conduct elemental analysis. Using a nitrogen-based plasma that runs on air, the 4100 MP-AES does not require flammable or expensive gases. […]

Read more >>> Microwave Plasma-Atomic Emission Spectrometer for Gold and Precious Metals Analysis

Agilent Cary630 Fourier Transform Infrared Spectrometer (FTIR) is for laboratory analysis of solids, liquids and gases. Cary630 FTIR removes the need to use a liquid transmission cell through Agilent’s unique liquid sampling technology, it is ideal for QA/QC in the chemical and pharmaceutical industries.

Read more >>> Fourier Transform Infrared Spectrometer for Analysis of Solids, Liquids and Gases

November 2011:- Tektronix introduced Industry’s Fastest Coherent Lightwave Signal Analyzer OM4106D, which Offers Accurate, Confident Test Results for Today’s Fastest Optical Communications Systems. OM4106D Coherent Lightwave Signal Analyzer – the first coherent test system with 33 GHz bandwidth support. This industry-fastest performance is achieved through tight integration with the DPO70000D Series oscilloscopes for exceptional real-time […]

Read more >>> Coherent Lightwave Signal Analyzer OM4106D

By combining a clever physical interface with computer-vision algorithms, researchers in MIT’s Department of Brain and Cognitive Sciences have created GelSight, a simple portable 3D imaging system that can achieve resolutions previously possible only with large and expensive lab equipment. The device could provide manufacturers with a way to inspect products too large to fit […]

Read more >>> Super-High-Resolution 3D Imaging for Surface Measurements

Showing results 1 - 20 of 105 for the category: Testing & Measurement.