Pickering Interfaces, a leading provider of signal switching and simulation solutions used in electronic test and verification,will be featuring its latestPXI switching and sensor simulation modules at The PXI Show–China, which will be held in Beijing on April 13and in Shanghai on April 18 (www.pxishow.cn). These products include Pickering’s PXI switch, programmable resistor, thermocouple simulator, RF/Microwave and chassis products.Below are some of the products that will be highlighted at the shows.

Millivolt Thermocouple PXI Simulator Module (model 41-760) – A low-voltage source module ideal for simulating the operation of a thermocouple. This module supports up to 32 channels from a single-slot 3U PXI module, each with an independent output of -100mV to +100mV and a remote sense that allows for the correction of ground voltages on each channel.

2 Amp PXI Fault Insertion Module (model 40-190B) – these fault insertion modules are available with 74, 64, or 32 channels and provide a high-density low-cost solution. They were primarily designed for the simulation of fault conditions in automotive applications involving the reliability testing of safety critical controllers.

PXI Microwave Multiplexer (model 40-784A) – these MUXs support single, dual, or triple SP4T or SP6T relays and are available in a variety of different frequency options for 50 Ω, from 6GHz to 40GHz. All models occupy just two 3U PXI slots and feature LED’s that indicate which path of the multiplexer is closed.

PXI-Show-China-2017PXI Programmable Resistor and Relay Module (model 40-294) – featuring lower density and lower cost for simulating variable resistors. These modules have 12 resistance range options with resolutions of 0.25 Ohm to 2 Ohm and channel counts of two or four. They have the option of eight extra SPST relays that can be used for extending the resistance range or for other switching functions within a test system. All versions use high-quality instrument grade reed relays to ensure long service life and fast setting times.

All the PXI modules can be used in any PXI chassis and can be fitted to PXI hybrid slots in a PXIe chassis. They also can also be used in Pickering Interfaces’ LXI Modular chassis for users preferring control via an Ethernet port, including Pickering’s new:
2-slot USB/LXI Modular Chassis (model 60-104) – this new chassis offers a small lightweight form factor, making it ideal for portable, benchtop and space restrictive applications. It supports one or two 3U Pickering PXI modules and accepts the majority of Pickering’s PXI products. The USB compatible and LXI compliant interfaces enable the chassis to be controlled directly through standard interfaces found on most personal computers—allowing for a very cost effective route into the modular test and measurement market.

Switch Path Manager Signal Routing Software – This signal routing software simplifies signal routing through switching systems and speeds up the development of switching system software. Switch Path Manager supports Pickering’s PXI, LXI, PCI and GPIB switching modules and the interconnection between these products.

Pickering will also highlight their eBIRST Switching System Test Tools. These tools, designed specifically for Pickering’s PXI, PCI or LXI (Ethernet) products, simplify switching system fault-finding by quickly testing the system and graphically identifying the faulty relays.

Pickering Interfaces stands behind all of their manufactured products with a standard three-year warranty and guaranteed long-term product support. Pricing and availability information is supplied on their web site at www.pickeringtest.com.

Advertisement