Camarillo, California – December 07, 2010:- Semtech Corp., a leading supplier of analog and mixed-signal semiconductors, has expanded its point-of-load (POL) regulator platform to include a highly-integrated, 4A output current, synchronous buck regulator with programmable soft-start in a tiny 3 x 3 x 0.6mm package. The new SC185 joins Semtech’s existing platform of POL regulators, which includes a wide selection of output currents ranging from 0.5A to 4A.

The SC185 simplifies power supply design by integrating the regulator, loop compensation components, power MOSFETs and MOSFET drivers on one chip. This high level of integration eliminates the need for external loop stabilization components and programming resistors, allowing designers to easily drop the SC185 onto their PC board, minimizing layout time and effort, with the added benefit of reducing the total board space requirements to an ultra-compact, 89mm2 overall solution footprint. Additionally, the user-programmable soft-start minimizes inrush current to effectively manage overall system power drain.

Point-of-Load (POL) RegulatorsThe new SC185 POL regulator features a fixed, 1.5MHz PWM (pulse-width-modulation) switching frequency and accepts input voltages from 2.9V to 5.5V, with output voltages ranging from 1.0V to 3.3V. The device also offers a low, 1µA (typ.) shutdown current and excellent transient response, as well as a power-good indicator to prevent data corruption by holding the system controllers and EEPROM in reset mode until the IC meets known-good regulation. A full range of standard protection functions, including input under-voltage lockout, output over-voltage and current-limit protection, over-temperature protection, and thermal shutdown are also featured.

Key Features of SC185 Point-of-Load (POL) Regulators

  • 4A output current
  • Programmable soft-start
  • Tiny, low-profile, 16-pad 3 x 3 x 0.6mm MLPQ package with exposed thermal pad
  • Ultra-compact, 89mm2 solution footprint
  • Integrated regulator, loop compensation components, MOSFETs and MOSFET drivers
  • High operating efficiency up to 95%
  • Automatic power-save (PSAVE) to maximize standby efficiency
  • Fast transient response
  • 1.5MHz PWM switching frequency

Applications of SC185 Point-of-Load (POL) Regulators

  • Cable Modem:  Switching Regulators
  • GPON – Gigabit Capable Passive Optical Network:  Switching Regulators
  • HDTV:  Switching Regulators
  • Laser Printer:  Switching Regulators
  • Notebook PC:  Graphics Memory Controller, I/O Controller Hub, Peripheral Power
  • Router and Switch:  Switching Regulators
  • Wireless Base Station:  Low Current Power, System Control Processor
  • Wireless Node B:  Low Current Power, System Control Processor
  • White Goods:  DC Solenoid/Valve Supply

The SC185 is available immediately in production quantities and is priced at $1.60 each in 3,000-piece lots. The ordering codes are: SC185BULTRT (1.0V), SC185EULTRT (1.2V), SC185HULTRT (1.5V) SC185JULTRT (1.8V), SC185LULTRT (2.5V) and SC185QULTRT (3.3V). The ordering code for starter kits is SC185EVK. Semtech offers comprehensive design assistance, including field- and factory-based support. Data sheets, volume pricing, and delivery quotes, as well as evaluation kits and samples, are available at